規(guī)格:個
所屬類型:振動噪音測量儀
品牌:東方
low noise and low drift
2-wire connection - power supplied by current loop
loop current limitation
integrated reverse polarity protection
highly stable sensor supply voltage
protection against reverse polarity of sensor connection
zero position and gain adjustable via potentiometers
electronic components hermetically sealed
optionally frequency programmable, active 3rd order low pass filter
optional high pass filter
different connector options
Description
The NV6a amplifies, filters and normalizes the output signals of SEIKA sensors. The symmetrical output signal enables unproblematic subsequent signal processing on the basis of 4...20mA current loop technology.
The NV6a does not require a separate supply voltage, as the internal operating voltage feeds off the current loop. The NV6a furthermore provides a highly stable 5V sensor supply voltage with short circuit current limitation.
Multiple internal switching variants allow for optimal adaptation of signal processing parameters, such as settling time, filter cut-off frequencies and amplification and zero point adjustment, to the measuring task.
Application
The NV6a has its application anywhere a SEIKA sensor is, without much expenditure and under optimal compatibility, to be connected to measuring equipment operating on 4...20mA, 2-wire current loop basis and subsequent adjustment of amplification and zero position are necessary.
Typical applications are the coupling with memory programmable control systems and the signal transmission over long distances with little transmission line setup.
Technical Specifications
Terminal voltage 10V ... 30V (reverse polarity protected to -70Volt)
Minimum loop current excluding sensor 2.5mA ... 3.5mA
Maximum loop current 22mA ... 26mA
Operating temperature -40°C ... +85°C
Internally generated sensor supply voltage +5.00 Volt
Temperature drift of sensor supply voltage 20 ppm/Kelvin
Maximum allowable sensor current approx. 2mA
Signal loop current range 4...20mA
Zero current 12mA
Compensation range of sensor offset voltage US_offset 2.3V ... 2.7V (larger ranges, e.g. for B1 in Z direction on request)
Amplification range with respect to a loop current of 12±8mA US_offset±100mV, US_offset±300mV (on request)
Maximum load resistance at 24V supply voltage 500 Ohm
Signal-to-noise ratio 30μVs.s.
Signal-to-noise ratio with standard sensors > 65dB
Frequency range 0...10Hz, 0...200Hz, 0...1kHz, custom ranges on request
Electrical connections pin connector 2.54mm, length 5.7mm, ? 0.63mm gold-plated
soldering pads optional
NV8a
Filtering signal conditioner for sensor signal matching with an asymmetric 0...5V output voltage
SEIKA front page
print version (pdf)
Features
low noise and low drift
no stabilized supply voltage necessary
integrated reverse polarity protection
outputs are short circuit proof
highly stable supply voltage for sensor operation
protection against reverse polarity of sensor connection
zero position and gain adjustable via potentiometers
electronic components hermetically sealed
optionally frequency programmable, active 4th order low pass filter
optional high pass filter
different connector options
Description
The NV8a amplifies, filters and normalizes the output signals of SEIKA sensors. The asymmetric output signal enables unproblematic, subsequent signal processing with standard measuring equipment, such as oscilloscopes, transient recorders, A/D converters, multimeters, etc., operating with this asymmetric signal level.
The NV8a requires a non-stabilized supply voltage in the range of 9...30 Volt. The NV8a provides a highly stable 5V voltage with short circuit current limitation as a sensor supply voltage.
Multiple internal switching variants allow for optimal adaptation of signal processing parameters, such as settling time, filter cut-off frequencies and amplification and zero point adjustment, to the measuring task.
上海滄燦自動化科技有限公司銷售東方 個,針對東方 個客戶提供相關咨詢服務,需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。
上海滄燦自動化科技有限公司
經營模式:貿易型
所在地區(qū):上海 松江